Arizer Air SE Vaporizer

We express post our products and provide tracking. Please ensure to provide your detailed address. Delivered items will not be left unattended if there is no one at the provided address to receive them. Please see further details at our store shipping and return policy page.

• Heating System: Conduction and Convection
• Vapour Path: Pure glass stem mouthpiece for clean and flavourful vapour
• Heat-up Time: Approximately 1 minute from cold, 30 seconds from low settings
• Session Timer: 10-minute sessions for long, relaxing sessions
• Battery Life: Over 60 minutes of continuous use on a single charge
• Battery Type: Replaceable standard 18650 battery
• Charging: Pass-through charging capability
• Design: Lightweight and durable with a tough polymer shell
• Temperature Settings: 5 preset temperature control settings
  • Blue: 180°C
  • Pink: 190°C
  • Green: 200°C
  • Yellow: 205°C
  • Red: 210°C
• Controls: Two-button control system for easy operation
• Warranty: Lifetime manufacturer's warranty on the heating element; 1-year warranty on everything else (excluding battery and glass)

• 1 x Arizer Solo II
• 1 x Australian Plug
• 1 x 90mm Straight Glass Stem
• 1 x Long Straight Glass Stem
• 1 x Potpourri Glass Bowl
• 1 x Belt-Clip Carry Case
• 2 x Stem Caps
• 1 x Stir Tool
• 1 x AC Battery Charger
• 1 x Optional Mesh Screen Pack
• 1 x Instruction Manual

Warranty: Lifetime manufacturer's warranty on the heating element; 1-year warranty on everything else (excluding battery and glass) Please keep record of receipt and ensure to contact Arizer and provide as much detail as needed. 

For more information please visit https://arizer.net/sales-and-refunds/

1. Charge the Battery: Before your first use, make sure to fully charge the replaceable 18650 battery. You can do this by plugging in the vaporizer using the included charging cable and connecting it to a power source. Once fully charged, you're ready to go.

2. Load the Chamber: Gently remove the glass stem mouthpiece from the Arizer Air SE. Grind your dry herbs to a medium-fine consistency and load them into the chamber at the end of the glass stem. Be careful not to overpack it to allow for proper airflow.

3. Power On: Press and hold the power button located on the front or side of the device, depending on the model, for a few seconds until the device powers on. The indicator lights will illuminate, indicating that the device is ready to use.

4. Select Temperature: Use the up and down buttons to select your desired temperature setting. The indicator lights will indicate the current temperature. Choose from the available preset temperature options: Blue (180°C), Pink (190°C), Green (200°C), Yellow (205°C), or Red ( 210°C).

5. Heat-up Time: After selecting the temperature, the device will begin heating up. It typically takes around one minute to reach the desired temperature. The indicator lights will flash or change color to indicate that the device has reached the set temperature.

6. Start Vaping: Once the device has reached the desired temperature, insert the glass stem mouthpiece back into the vaporizer. Take slow, steady draws from the mouthpiece to inhale the vapor. Enjoy the smooth and flavourful vapour produced by the Arizer Air SE.

7. Session Timer: The Arizer Air SE has a 10-minute session timer. It will automatically shut off after 10 minutes of use. If you want to continue vaping, simply power on the device again and resume your session.

8. Power Off: To power off the device, press and hold the power button for a few seconds until the indicator lights turn off. The device will cool down gradually.

9. Maintenance: After each session, it's recommended to clean the glass stem mouthpiece to maintain optimal performance. You can use isopropyl alcohol and pipe cleaners to clean the glass stem. Refer to the user manual for detailed cleaning instructions.

*Remember to always read and follow the instructions provided in the user manual for your specific model of the Arizer Air SE. Enjoy your vaping sessions with the Arizer Air SE!

Note: When turning on (pressing hole button down), initial Battery light flashing indicated battery amount. After when color changed, it will indicate what temperature it is set at. The Power light will flash BLUE when heating up and then become steady when temperature it reached.